• 0 Vote(s) - 0 Average
Thread Closed 


CLOSED NX-OS 9000v Release 7.0(3)I 5(1)
1
NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades







2
thanks




3
awesome thank u. I was looking for it.
This post was last modified: 01-22-2017, 03:17 PM by start.




4
(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades


Thanks




5
(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades




6
(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades

Thanks




7
(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades




8
(01-14-2017, 05:04 PM)Great thx ! Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades




9
(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades




10
(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades







Forum Jump:


Users browsing this thread:
1 Guest(s)


Copyright © ITStudyGroup.org 2015-2020

ITStudyGroup.org is not sponsored by, endorsed by or affiliated with Cisco Systems, Inc. Cisco®, Cisco Systems®, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™ the Cisco Systems logo and the CCIE logo are trademarks or registered trademarks of Cisco Systems, Inc. All other trademarks, including those of Microsoft, CompTIA, VMware, Juniper ISC(2), and CWNP are trademarks of their respective owners.