• 0 Vote(s) - 0 Average
Thread Closed 


CLOSED SPOTO full CCIE RS Lab 5.0 Solution Download
1
SPOTO CCIE Club released the latest CCIE RS Lab Solution .

TS2  H3 Diag  H2 CFG
TS2
1.VACL is wrong,change access-list ,no seq 10 and no seq 30
2.no ip ospf cost 9 (the interface of SW111 connect R15)
3.R23 loopback: OSPF process is wrong ,change OSPF 10 to OSPF 1
  R22 and R23 use origina to control path, compare R12 and R13 
  SW210 ping 10.254.101.1 one of the hop is wrong ,,R13 interface add ip os cost 11
4. R21 had config LP,but do not use it 
5. R60 tunnel mask is /32,change to /24
6. SW111, OSPF DO NOT network VLAN 2001,
    R15 redistribute OSPFv3 to BGP
7.R10  ospf  config “DISTANCE OSPF EXTERNAL 19” ,change 19 to 219.
   R3 RT import wrong,R5 lo0 network wrong ospf process
8. SW300,SW301,SW310. add “IP ARP INSPECTION TRUST”  Under PORT-CHANNEL.
9.R24  change  tunnel interface ospf network,ip os net p2mp change to p2p
10.
   ip nat inside source static 123.45.67.100 10.2.200.1
    Change to 
   ip nat inside source static 10.2.200.1 123.45.67.100   
   ip nat inside source static 201.99.70.2 201.99.25.70 
    Change to
   ip nat outside source static 201.99.70.2 201.99.25.70

More ccie lab solutions  donwload link:








[url=http://cciers.spoto.net][/url]

good luck for all ccie guys.
This post was last modified: 01-05-2019, 02:32 PM by billy.




2
thanks




3
(08-03-2017, 06:42 AM)Speedys Wrote: SPOTO CCIE Club released the latest CCIE RS Lab Solution .

TS2  H3 Diag  H2 CFG
TS2
1.VACL is wrong,change access-list ,no seq 10 and no seq 30
2.no ip ospf cost 9 (the interface of SW111 connect R15)
3.R23 loopback: OSPF process is wrong ,change OSPF 10 to OSPF 1
  R22 and R23 use origina to control path, compare R12 and R13 
  SW210 ping 10.254.101.1 one of the hop is wrong ,,R13 interface add ip os cost 11
4. R21 had config LP,but do not use it 
5. R60 tunnel mask is /32,change to /24
6. SW111, OSPF DO NOT network VLAN 2001,
    R15 redistribute OSPFv3 to BGP
7.R10  ospf  config “DISTANCE OSPF EXTERNAL 19” ,change 19 to 219.
   R3 RT import wrong,R5 lo0 network wrong ospf process
8. SW300,SW301,SW310. add “IP ARP INSPECTION TRUST”  Under PORT-CHANNEL.
9.R24  change  tunnel interface ospf network,ip os net p2mp change to p2p
10.
   ip nat inside source static 123.45.67.100 10.2.200.1
    Change to 
   ip nat inside source static 10.2.200.1 123.45.67.100   
   ip nat inside source static 201.99.70.2 201.99.25.70 
    Change to
   ip nat outside source static 201.99.70.2 201.99.25.70

More ccie lab solutions  donwload link:





More info reach the legit website:


good luck for all ccie guys.

Thanks for sharing




4
Thanks




5
(08-03-2017, 06:42 AM)Speedys Wrote: SPOTO CCIE Club released the latest CCIE RS Lab Solution .

TS2  H3 Diag  H2 CFG
TS2
1.VACL is wrong,change access-list ,no seq 10 and no seq 30
2.no ip ospf cost 9 (the interface of SW111 connect R15)
3.R23 loopback: OSPF process is wrong ,change OSPF 10 to OSPF 1
  R22 and R23 use origina to control path, compare R12 and R13 
  SW210 ping 10.254.101.1 one of the hop is wrong ,,R13 interface add ip os cost 11
4. R21 had config LP,but do not use it 
5. R60 tunnel mask is /32,change to /24
6. SW111, OSPF DO NOT network VLAN 2001,
    R15 redistribute OSPFv3 to BGP
7.R10  ospf  config “DISTANCE OSPF EXTERNAL 19” ,change 19 to 219.
   R3 RT import wrong,R5 lo0 network wrong ospf process
8. SW300,SW301,SW310. add “IP ARP INSPECTION TRUST”  Under PORT-CHANNEL.
9.R24  change  tunnel interface ospf network,ip os net p2mp change to p2p
10.
   ip nat inside source static 123.45.67.100 10.2.200.1
    Change to 
   ip nat inside source static 10.2.200.1 123.45.67.100   
   ip nat inside source static 201.99.70.2 201.99.25.70 
    Change to
   ip nat outside source static 201.99.70.2 201.99.25.70

More ccie lab solutions  donwload link:





More info reach the legit website:


good luck for all ccie guys.




6
great work




7
(08-03-2017, 06:42 AM)Speedys Wrote: SPOTO CCIE Club released the latest CCIE RS Lab Solution .

TS2  H3 Diag  H2 CFG
TS2
1.VACL is wrong,change access-list ,no seq 10 and no seq 30
2.no ip ospf cost 9 (the interface of SW111 connect R15)
3.R23 loopback: OSPF process is wrong ,change OSPF 10 to OSPF 1
  R22 and R23 use origina to control path, compare R12 and R13 
  SW210 ping 10.254.101.1 one of the hop is wrong ,,R13 interface add ip os cost 11
4. R21 had config LP,but do not use it 
5. R60 tunnel mask is /32,change to /24
6. SW111, OSPF DO NOT network VLAN 2001,
    R15 redistribute OSPFv3 to BGP
7.R10  ospf  config “DISTANCE OSPF EXTERNAL 19” ,change 19 to 219.
   R3 RT import wrong,R5 lo0 network wrong ospf process
8. SW300,SW301,SW310. add “IP ARP INSPECTION TRUST”  Under PORT-CHANNEL.
9.R24  change  tunnel interface ospf network,ip os net p2mp change to p2p
10.
   ip nat inside source static 123.45.67.100 10.2.200.1
    Change to 
   ip nat inside source static 10.2.200.1 123.45.67.100   
   ip nat inside source static 201.99.70.2 201.99.25.70 
    Change to
   ip nat outside source static 201.99.70.2 201.99.25.70

More ccie lab solutions  donwload link:





More info reach the legit website:


good luck for all ccie guys.




8
(08-03-2017, 06:42 AM)Speedys Wrote: SPOTO CCIE Club released the latest CCIE RS Lab Solution .

TS2  H3 Diag  H2 CFG
TS2
1.VACL is wrong,change access-list ,no seq 10 and no seq 30
2.no ip ospf cost 9 (the interface of SW111 connect R15)
3.R23 loopback: OSPF process is wrong ,change OSPF 10 to OSPF 1
  R22 and R23 use origina to control path, compare R12 and R13 
  SW210 ping 10.254.101.1 one of the hop is wrong ,,R13 interface add ip os cost 11
4. R21 had config LP,but do not use it 
5. R60 tunnel mask is /32,change to /24
6. SW111, OSPF DO NOT network VLAN 2001,
    R15 redistribute OSPFv3 to BGP
7.R10  ospf  config “DISTANCE OSPF EXTERNAL 19” ,change 19 to 219.
   R3 RT import wrong,R5 lo0 network wrong ospf process
8. SW300,SW301,SW310. add “IP ARP INSPECTION TRUST”  Under PORT-CHANNEL.
9.R24  change  tunnel interface ospf network,ip os net p2mp change to p2p
10.
   ip nat inside source static 123.45.67.100 10.2.200.1
    Change to 
   ip nat inside source static 10.2.200.1 123.45.67.100   
   ip nat inside source static 201.99.70.2 201.99.25.70 
    Change to
   ip nat outside source static 201.99.70.2 201.99.25.70

More ccie lab solutions  donwload link:





More info reach the legit website:


good luck for all ccie guys.

Thank you.




9
Great post brother




10
thanks







Forum Jump:


Users browsing this thread:
1 Guest(s)


Copyright © ITStudyGroup.org 2015-2020

ITStudyGroup.org is not sponsored by, endorsed by or affiliated with Cisco Systems, Inc. Cisco®, Cisco Systems®, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™ the Cisco Systems logo and the CCIE logo are trademarks or registered trademarks of Cisco Systems, Inc. All other trademarks, including those of Microsoft, CompTIA, VMware, Juniper ISC(2), and CWNP are trademarks of their respective owners.