Welcome Guest, Not a member yet? Create Account  


Thread Contributor: Billy NX-OS 9000v Release 7.0(3)I 5(1)

#1

NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades

Hidden Content:
You must reply to see this content
Reply

#2

thanks
Reply

#3
(This post was last modified: 01-22-2017, 03:17 PM by start.)

awesome thank u. I was looking for it.
Reply

#4

(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades


Thanks
Reply

#5

(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades
Reply

#6

(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades

Thanks
Reply

#7

(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades
Reply

#8

(01-14-2017, 05:04 PM)Great thx ! Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades
Reply

#9

(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades
Reply

#10

(01-14-2017, 05:04 PM)Billy Wrote: NX-OSv is a reference platform for an implementation of the Cisco Nexus operating system, based on the Nexus 7000-series platforms, running as a full virtual machine on a hypervisor.
NX-OSv supports up to 28 Gigabit Ethernet interface.
NX-OSv provides partial layer-3 control-plane and data-plane functionality. Layer-2 functionality is not supported.
This image is provided 'as-is'. There is no support for this image from Cisco's Technical Advisory center. This image is not for use in a production environment and is considered to be a simulator for the Nexus 7000-series and is not an emulator as the software data-plane does not emulate the Nexus 7000-series forwarding hardware.
The following list of features are included in the NX-OSv image:
802.1x
AAA
AMT
BGP
CDP/LLDP
EIGRP
FHRP-HSRP, GLBP, VRRP
ICMP
IGMP
IPv4
IPv4/6
IPv6
ISIS
L3 Routing Protocals
LDAP
LISP
MLD
MSDP
NTP
OSPF
PIM/PIM6
Radius
RIP
SNMP
Syslog
TACACS+
VRF
XML/Netconf
NX-API
NOT SUPPORTED:
OTV
QinQ
ACL's
vPC
BFD
CoPPS
UDLD
Hardware TCAM Related Features
Cisco TrustSec
Port Security
HA-ISSU Software Upgrades
Reply




Users browsing this thread:
1 Guest(s)