Welcome Guest, Not a member yet? Create Account  




CBT Nuggets - Cisco CCNP Route 300-101 Hands-on Labs Exam Prep

#1
Offer 

CBT Nuggets - Cisco CCNP Route 300-101 Hands-on Labs Exam Prep
by Keith Barker
Format: MP4
Total Videos : 24 Course Duration: 04:40:18 + Lab files
Size 465MB

Course Outline:

1. Ladies and Gentlemen, start your engines... (00:03:53)
In this Nugget, Keith provides an overview of the course and points out some resources available to assist you in building your own practice lab environment.
    
2. DMVPN Lab (00:24:25)
In this Nugget, Keith walks you through the creation of a DMVPN network from the ground up. The topology diagram and all the configuration commands used are available in the NuggetLab files.

For training on adding IPsec to a DMVPN network, please watch the Nugget "Protected DMVPN" in our CCNP Security SIMOS (300-209) course.
    
3. IPv6 RIPng Lab (00:10:12)
In this Nugget, Keith walks you through the configuration and verification of IPv6 and RIPng. Configuration commands and the topology diagram used are available in the NuggetLab files.

For more detailed training on IPv6, watch our IPv6 course.
    
4. IPv6 ACL and VTY (00:09:50)
In this Nugget, Keith walks you through building an IPv6 topology, an IPv6 Access Control List (ACL), and then using the ACL to control access through the VTY lines. The configuration commands and topology diagram are in the NuggetLab files.
    
5. Frame Relay Multi-Point (00:13:44)
In this Nugget, Keith demonstrates how to create a frame relay switch using an IOS router, and then builds and verifies a multi-point network. The configuration commands used and topology are in the NuggetLab files.
    
6. Frame Relay Point-to-Point (00:14:05)
In this Nugget, Keith demonstrates how to create a frame relay switch using a IOS router, and then builds and verifies a point-to-point network. The configuration commands and topology used are in the NuggetLab files.
    
7. IPv4 EIGRP Summarization (00:14:57)
Less is sometimes better than more, and summarization of networks can reduce the number of routes that have to be shared. In this Nugget, Keith builds a topology and walks you through manual and automatic summarization of EIGRP networks. Commands used and the topology diagram are in the NuggetLab files.
    
8. IPv4 EIGRP Distribute-list (00:06:36)
In this Nugget, Keith walks you through the creation of an EIGRP topology, and then implements distribute-lists to control which networks are advertised to EIGRP neighbors. The NuggetLab files include the commands and the topology diagram used in this video.
    
9. IPv4 EIGRP Authentication (00:06:08)
In this Nugget, Keith walks you through implementing and verifying EIGRP authentication. The configuration files and topology diagram are part of the NuggetLab files.
    
10. Named EIGRP and VRF Support (00:09:07)
This Nugget demonstrates how to lab up and verify named EIGRP to support a Virtual Routing and Forwarding (VRF) instance. The commands used are in the NuggetLab files.
    
11. EIGRP Stub (00:07:45)
Stub configuration allows faster convergence when a route goes missing in a EIGRP network. In this Nugget, Keith walks you through the creation of a lab environment using GNS3 to test and see the results of using the EIGRP stub. Commands used in this video are in the NuggetLab files.
    
12. Policy-Based Routing (PBR) (00:12:43)
In this Nugget, Keith walks you through the creation of a lab environment using GNS3 to test and see the results of Policy-Based Routing. The commands used, as well as the topology diagram, are in the NuggetLab files.
    
13. Variance (00:15:21)
In this Nugget, Keith walks you through labbing up and verifying EIGRP variance. The configuration commands and topology diagram used are in the NuggetLab files.
    
14. IPv6 OSPFv3 Virtual-link (00:16:34)
Keith demonstrates how to implement and verify IPv6 virtual-links. The full set of commands and the topology diagram used in this Nugget are in the NuggetLab files.
    
15. IPv4 OSPF Basics (00:09:34)
In this lab-based Nugget, you build and verify and IPv4 OSPF network. Configuration commands and the topology diagram used are in the NuggetLab files.
    
16. OSPF Stub (00:11:46)
Keith walks you through configuring a IPv4 OSPF network and seeing the direct effects of stub and totally stubby areas. The full commands and the topology diagram used are in the NuggetLab files.
    
17. Redistribution (00:19:27)
In this Nugget, Keith walks you through the configuration and verification of OSPF and EIGRP bidirectional redistribution on multiple routers. The topology diagram and all the commands used in this Nugget are in the NuggetLab files.

For more training on the concepts of redistribution, please watch Jeremy's Cioara's in-progress CCNP Route course.
    
18. Sub-optimal Routing (00:13:15)
This lab-based Nugget begins by using the topology created in a previous Nugget titled, "Redistribution," and then identifies and corrects sub-optimal routing in a redistributed network. The commands used in this lab are in the NuggetLab files.
    
19. uRPF (00:12:03)
Unicast Reverse Path Forwarding (uRPF) checks can help prevent malicious packets from entering our network. In this lab-based Nugget, Keith walks you through the configuration and verification of uRPF. The configuration and network diagrams are in the NuggetLab files.
    
20. IP Helper (00:08:10)
In this lab-based Nugget, Keith walks you through setting up and verifying the IP helper feature on a Cisco router. Configuration commands and topology diagram used in the video are included in the NuggetLab files.
    
21. BGP (00:12:12)
In this lab-based Nugget, Keith walks you through the configuration and verification of a BGP network. Full configuration commands used, as well as the topology diagram, are in the NuggetLab files.

For more training on the theory and operations of BGP, search for "BGP" on the CBT Nuggets website.
    
22. IPv6 EIGRP and Variance (00:11:10)
In this lab-based Nugget, Keith walks you though the configuration and verification of an IPv6 EIGRP network. The NuggetLab files include the commands used and the topology diagram.
    
23. NTP (00:06:45)
In this lab-based Nugget, you create an topology in GNS3 that includes NTP and verify that it is working. The packet capture, configuration commands, and topology diagram for this Nugget are included in the NuggetLab files.
    
24. IPv6 in IPv4 Tunneling (00:10:36)
In this lab-based Nugget, Keith walks you through the creation and verification of an IPv6-in-IPv4 tunnel. The commands used, topology diagram, and the packet capture file created in this Nugget are included in the NuggetLab files.
Download Link
Hidden Content:
You must reply to see this content
Reply

#2

thanks
Reply

#3

thanks!
Reply

#4
(This post was last modified: 06-21-2015, 08:31 PM by waninae39.)

thank you

thank you

i just need the gns3 files
Reply

#5

thank u
Reply

#6

thanks
Reply

#7

thanks
Reply

#8

Thanks for the link
Reply

#9

thanks
Reply

#10

Thanks!
Reply





Users browsing this thread:
1 Guest(s)